Our factory, the Alumíniumárugyár has 100 years of history; it was established in 1899.
It was transformed into a Public Limited Company in 1993. Our company has been producing low pressure, welded aluminium gas cylinders suitable for storing and transporting propane and butane (LPG) gases and refrigerants for industrial and domestic usage since 1949. Gas cylinders of various sizes are manufactured from aluminium discs, with deep drawing.
Our ALUCYL gas cylinders are made in five inner diameters: 180, 205, 250, 290 and 330 mm.

The gas cylinders have the following water capacities: 4.8; 4.86; 6.5; 14.3; 20; 26.2; 34; 50 litres.

Test pressure is between 30 and 33 bar for propane and butane (LPG) gas, and 48 to 50 bar for filling industrial refrigerants.

Our gas cylinders are manufactured according to the standards EN 12862 and 13110, and they meet the specifications of the standards set out in the 2010/35/EU TPED and ADR/RID Directives. The quality of the gas cylinders manufactured by us is certified by TÜV SÜD Industrie Service GmbH Deutschland by marking them with the sign “π “.
Our company meets the requirements of the TÜV Quality Management System according to the standard ISO 9001:2015

We also satisfy special requests. After a type approval process we produce gas cylinders with various diameters or water capacity, even with multiple valves.

Advantages of our aluminium gas cylinders over steel cylinders

ALUCYL gas cylinders made of special Al-Mg-Si alloy have many advantages over steel and any other aluminium cylinders:

 

Unique advantages; a comparison of aluminium and steel cylinders, taking special local climatic characteristics into consideration:

palackokAluminium cylinders are much more resistant to salty sea air than steel cylinders, thus the life span of cylinders used on ships, at or near seaside is considerably longer. No repainting or other corrosion protection is needed; therefore, your maintenance costs are much lower than that of steel cylinders. Due to the low weight their transportation and handling is significantly easier.

Alucyl has a technically exceptional and unique construction. Thanks to our innovative technology, welding joint is found at the neck of the cylinder, where the stress under pressure is only 1/9 compared with traditional cylinders welded at the centre by a different producer. Thus our products are much safer and have a longer lifetime.

References

In the past decades Alumíniumárugyár ZRt. has produced over 9 million aluminium cylinders, of which cca. 3 million pieces have been sold abroad.

Our clients all over the world have our products assessed and approved by their own national authority; our products always meet the requirements.

Our gas cylinders are used in almost all European countries, as well as on other continents.

We would be pleased to serve our potential customers with individual or standard needs with our high level of expertise and competitive prices.

If you require further information on a price quote, please contact us at sales@alurt.hu

Utilizations areas

Household cooking and heating equipment, caravanning, camping, sailing, yachting. Test pressure is between 30 – 33 bar for propane and butane (LPG).
(4.8L, 6.5L, 14.3L, 26.2L, 34L, 50L)

Test pressure is between 30 bar for propane and butane (LPG).
(26.2L, 34L)

Test pressure is between 48 – 50 bar for refrigerants.
(4.86L, 14.3L, 20L)
Refrigerant gases which can be filled into the cylinders
R22, RS24, R124, R125, R134a, R142b, R143a, R227, R240FF, R404A, R407A, R407B, R407C, R410A, R410B, R413A, R417A, R419A, R422A, R422D, R437A, R507, R507A, ammonia. Types of the gases are only informing data.

 

alu_palackuj_csoport
Volume Type Test
pressure
Tara
mass
Filling
mass
Outer
Diameter
Height Gas
4.8 L 518.233 33 bar 1,8 kg 2 kg 186 mm 258 mm propane and butane
4.86 L 518.230 50 bar 2 kg varying 186 mm 340 mm refrigerants
6.5 L 521.101 33 bar 2,15 kg 2,7 kg 212 mm 258 mm propane and butane
14.3 L 525.246 33 bar 5,4 kg 6 kg 256 mm 495 mm propane and butane
14.3 L 525.241 50 bar 5,8 kg varying 258 mm 495 mm refrigerants
20 L 529.242 48 bar 6,9 kg varying 298 mm 516 mm refrigerants
26.2 L 529.244 33 bar 7,2 kg 11 kg 298 mm 610 mm propane and butane
34 L 529.254 30 bar 8,2 kg 14,3 kg 298 mm 725 mm propane and butane
50 L 533.140 30 bar 11 kg 21 kg 338 mm 820 mm propane and butane

Wall thickness is between 3-4 mm depends on type. Propane butane nominal filling ratio is 0.42 L/kg.
Beside ethylene oxide (C2H4O), helium (He) and sulphur dioxide (SO2) can be filled into the cylinders as well.

Types of gas cylinders

palack_1

Volume 4.8 L Filling mass 2 kg
Type 518.233
Gas propane and butane

palack_2

Volume 6.5 L Filling mass 2,7 kg
Type 521.101
Gas propane and butane

palack_3

Volume 14.3 L Filling mass 6 kg
Type 525.246
Gas propane and butane

palack_4

Volume 26,2 L Filling mass 11 kg
Type 529.244
Gas propane and butane

palack_5

Volume 34 L Filling mass 14,3 kg
Type 529.254
Gas propane and butane

palack_6

Volume 50 L Filling mass 21 kg
Type 533.140
Gas propane and butane

palack_7

Volume 4.86 L
Type 518.230
Gas refrigerants

palack_8

Volume 14.3 L
Type 525.241
Gas refrigerants

palack_9

Volume 20 L
Type 529.242
Gas refrigerants

Methods of transportation

alu_palackuj_gazpalackok1

Palletized

alu_palackuj_gazpalackok2

Placed by the line, protected by corrugated paper

Countries where our product are distributed

alu_palackuj_uj_terkep
Austria
Belgium
Czech
Republic
Denmark
Estonia
Finland
France
Germany
Hungary
Italy
Latvia
Lithuania
Netherlands
New Zealand
Norway
Portugal
Russia
Slovakia
Slovenia
Spain
Sweden
Switzerland
United Kingdom

Certificate

certificate_1
certificate download

certificate_3certificate download

brochure download

top